Electricity is already the quiet infrastructure behind modern life. It powers factories, hospitals, phones, refrigeration and increasingly the vehicles and heating systems that once ran directly on fossil fuels. Yet electricity still supplies only a little more than one-fifth of the energy people use after conversion losses and other energy accounting are taken into consideration. That gap is the reason a new ambition at COP31 matters.
The COP31 Presidency’s 35-by-35 Global Electrification Pledge seeks to raise electricity’s share of global total final energy consumption to 35% by 2035. It is an ambition for the energy people and businesses actually use—not a promise that 35% of electricity will be renewable, and not a binding global treaty target imposed on every country. The distinction is crucial.
At the climate summit in Antalya, the conversation is moving beyond adding clean power plants toward a harder question: can economies replace more direct fossil-fuel use with electricity, while making that electricity affordable, reliable and cleaner? The answer depends less on a slogan than on what happens to grids, buildings, industry, transport and investment over the next decade.
What “35 by 35” actually measures
Energy statistics can make electrification sound more confusing than it is. Electricity’s share of final energy consumption measures how much of the energy delivered to end users arrives as electricity. It is not the same as electricity’s share of primary energy, which counts energy sources before conversion, and it is not the same as the percentage of electricity generated by renewables.
That means three separate changes are needed to make the pledge meaningful:
- Electrify end uses: replace some petrol, diesel, gas and other direct fuel use with electric technologies—such as electric vehicles, heat pumps, induction equipment and electric industrial processes.
- Clean up generation: produce more electricity from low-emissions sources, including wind, solar, hydro, nuclear and other options suited to each country.
- Make the system dependable: expand transmission and distribution, storage, flexibility and demand management so electricity is available when and where it is needed.
The pledge text points to analysis by the International Energy Agency (IEA) and the International Renewable Energy Agency (IRENA). It describes pathways consistent with limiting warming to 1.5°C in which electricity reaches around 35% of final energy use by 2035 and more than 50% by 2050. Those figures describe a pathway, not a forecast that the world will automatically achieve it.
Why electrification is becoming an economic question
Electrification is often presented as a climate measure. It is also a question of exposure to fuel-price shocks, industrial competitiveness and household budgets. Countries that import large quantities of oil or gas can be vulnerable when shipping routes, geopolitics or production decisions disrupt supply. A more efficient electric system powered increasingly by domestic resources can reduce some of that exposure—although it does not eliminate dependence on imported equipment, minerals or fuels.
The point is not that electricity is always cheap. Electricity bills can rise when generation is expensive, grids are congested or investment costs are poorly allocated. The benefit comes from using energy more efficiently and diversifying how it is produced. An electric motor, for example, generally converts a much larger share of delivered energy into motion than a combustion engine. Heat pumps can move heat rather than create it through combustion, which can make them highly efficient in suitable climates and buildings.
For households, the practical test is simple: does switching reduce the total cost of ownership, improve comfort or reliability, and avoid shifting costs onto people who cannot afford the equipment? A cheaper running cost is not enough if the upfront purchase price, financing or a weak local grid makes the technology inaccessible.
The grid is the real bottleneck
Installing solar panels or wind turbines is only one part of the transition. Electricity must travel from where it is generated to where it is consumed, often across long distances and at different times of day. A grid designed around a limited number of large power stations may need new lines, substations, transformers, digital controls and stronger local distribution networks as demand becomes more electric.
This is not an abstract engineering concern. The Light Span has already examined how rising computing demand is exposing power constraints in AI data centers’ electricity needs and why grid capacity is becoming a strategic challenge. Those stories are one visible example of a wider issue: electrification, digital infrastructure and economic growth increasingly compete for the same connections, equipment and planning capacity.
Grid expansion is slow in many places because projects require land, permits, financing, skilled workers and coordination across jurisdictions. A new transmission line can take years to plan and build. If electric vehicles, industrial plants or new housing arrive before the network is ready, consumers may face connection delays or local congestion even when the country has enough electricity in aggregate.
That is why a credible 35-by-35 pathway must treat networks as core infrastructure—not as a final technical detail after generation projects are announced.
Renewables need flexibility, not just capacity
Wind and solar can add electricity without fuel purchases, but their output varies with weather and time. A reliable system balances that variability with a mix of resources: storage, flexible demand, stronger interconnections, dispatchable generation, forecasting and operational changes. No single technology solves every region’s needs.
Batteries can shift electricity across hours; they are not automatically a substitute for every form of seasonal storage or firm capacity. Hydropower, nuclear, geothermal, gas with appropriate emissions controls, and other resources may play different roles depending on geography, cost, safety and policy. The sensible question is not whether one source wins everywhere, but whether the portfolio can meet demand through difficult conditions.
Consumers can also help the system. Smart charging lets electric vehicles absorb power when it is plentiful or cheaper. Industrial processes may be able to move some consumption to different hours. Better building insulation reduces the amount of energy needed before a heating or cooling system is electrified. Efficiency is therefore a companion to electrification: it can lower bills and reduce the size of infrastructure required.
Buildings: the quickest everyday opportunity
Buildings offer a practical place to make progress because many energy services are already familiar. Heat pumps can provide heating and cooling; electric water heaters and induction cooktops can replace direct fuel use; insulation and controls can reduce demand. But the right sequence matters. A poorly insulated building with an undersized electrical connection may need upgrades before a heat pump can deliver its promised savings.
COP31’s Antalya Compact for Energy Efficient Buildings connects electrification with a goal of pursuing a 25% reduction in operational energy intensity across the global building stock relative to 2020 levels by 2035. The pairing is important: replacing a boiler with an electric system is more effective when the building also wastes less energy.
Policy can make the transition less disruptive through building standards, retrofit finance, appliance efficiency rules, workforce training and targeted support for low-income households. Landlords and tenants also need aligned incentives; otherwise the person paying for an upgrade may not be the person receiving the lower energy bill.
Industry and transport will be harder
Road transport is among the more visible electrification opportunities. Electric cars and buses can reduce local pollution and fuel use, but the benefits depend on electricity supply, vehicle prices, charging access and the availability of reliable networks. Heavy trucks, aviation, shipping and some industrial processes are more difficult because they require high energy density, specialized equipment or very high temperatures.
Industry cannot be treated as one giant switch. Some processes can use electric motors, induction, resistance heating or heat pumps. Others may need hydrogen, alternative fuels, new production chemistry or a combination of approaches. The economics vary sharply between steel, cement, chemicals, food processing and mining. A national plan should identify which applications are ready now, which need demonstrations and which depend on infrastructure that does not yet exist.
Manufacturing competitiveness will also be shaped by the transition. The Light Span’s analysis of the uneven global manufacturing recovery shows why energy availability and investment conditions matter to industrial activity. Reliable power can attract production; expensive or interrupted power can undermine it. Electrification policy therefore needs to be designed with industrial strategy, not separated from it.
The mineral and water questions cannot be ignored
Electric technologies require materials: copper for wiring and grids, lithium and other minerals for some batteries, and a range of metals for motors, electronics and generation equipment. Supply chains are concentrated in some stages, and mines can create serious environmental and social costs. More electrification does not make resource governance optional.
Recycling, longer product lifetimes, material efficiency, diversified supply and transparent standards can reduce pressure. Governments should assess projects across the full chain—from extraction to processing, manufacturing, use and end-of-life—rather than count only the emissions avoided during operation.
That supply-chain exposure is already changing how firms source inputs and plan investment. Our Global Trade Outlook explains why resilience increasingly depends on more than the lowest-cost supplier; electrification adds another reason to diversify responsibly and build recycling capacity.
Water is another local constraint. Electricity generation and mineral processing can require water, while heat, drought and competing demands can make supplies less reliable. Our reporting on water inequality and economic resilience is relevant here: infrastructure plans that ignore access and local scarcity can create new vulnerabilities even while solving an energy problem.
What countries should measure—not just announce
A headline percentage is easy to communicate; progress is harder to measure. Governments and investors should track a small set of indicators that reveal whether electrification is reaching real users and whether the system can support it:
- Final-energy electrification: electricity’s share of total final energy consumption, with transparent definitions and comparable data.
- Clean electricity: emissions intensity of power generation and the share supplied by low-emissions sources.
- Grid delivery: transmission and distribution investment, connection queues, outage duration and congestion.
- End-use adoption: electric vehicle and heat-pump uptake, industrial electric process deployment, and access to charging or retrofit finance.
- Affordability and inclusion: household energy burden, access to reliable electricity, and whether support reaches vulnerable users.
- Efficiency: energy consumed per unit of service, output or floor area—not simply total demand.
These measures prevent a country from claiming success because it built renewable capacity while leaving factories, homes or transport dependent on direct fossil fuels. They also reveal when demand is growing faster than the network can accommodate it.
What COP31 can—and cannot—deliver
The COP31 Presidency’s 35-by-35 initiative is a signal of direction and a platform for cooperation. The UN Secretary-General’s November 11 remarks welcomed the pledge while emphasizing that ambition must be made clean and real. The summit can encourage governments, businesses and financial institutions to coordinate, develop road maps and mobilize investment.
It cannot build a national transmission line, reform a utility tariff or train an electrician by itself. Those tasks belong to national and local institutions, regulators, companies and communities. The pledge’s value will be judged by whether it helps turn a global aspiration into credible country plans, financing and implementation—and whether those plans are updated when costs, technologies or demand change.
There is also a fairness question. Countries with strong public finances and established grids can move faster than those facing debt constraints, unreliable networks or limited access to capital. A global target that ignores these differences risks widening the gap between energy-secure economies and those still struggling to provide dependable electricity. Finance, technology access and capacity building must be part of the implementation conversation.
How to tell whether the promise is working
Over the next few years, watch for more than declarations. The strongest evidence will be funded grid projects, shorter connection delays, transparent national electrification road maps, rising adoption of efficient electric equipment, and power systems that remain reliable during heat waves or fuel disruptions. It will also be visible in lower energy waste and in whether households can afford the transition without sacrificing essential services.
Businesses should map which operations can electrify now, what upgrades are needed and how electricity prices affect their investment decisions. Consumers can compare lifetime costs rather than purchase prices alone, improve efficiency before replacing equipment, and check whether local charging or service infrastructure is dependable. Policymakers should remove bottlenecks while protecting competition, affordability and environmental standards.
The Light Span Perspective
The 35-by-35 ambition is powerful because it changes the question from “How much clean electricity can we produce?” to “How much of the economy can we run efficiently and reliably on it?” That is a much more demanding test. It reaches into power networks, buildings, factories, transport, minerals, water, public finance and household budgets.
Electrification will not be a uniform race, and no country can copy another’s energy mix without considering its resources and needs. But the direction is clear: electricity is becoming a central platform for economic resilience as well as climate policy. The countries that treat grids, efficiency, skills and affordability as investments in productive capacity—not merely climate obligations—will be better placed to turn the pledge into lasting benefits.
The real milestone in 2035 will not be a percentage printed in a communiqué. It will be whether people and businesses have more reliable energy, whether the power behind it is cleaner, and whether the gains reach those who have historically been left behind.

